RO Water Purifier Installation in Chennai
RO water purifier installation is one of the most powerful ways to get the supply of pure drinking water. By installing an RO, you are safe from the various kinds of water hazards caused due to the intake of impure water. You can install an RO yourself by following the steps mentioned In RO water purifier installation guide. However, it is always recommended to take the services of the professionals for RO reinstallation. Below are the steps mentioned that how an RO water purifier expert installs an RO.
Preparing for RO installation
The professional takes out all the parts from the box and finds a suitable place where the RO system can be installed. RO technician fixes the feed water valve in the cold water connection.
Assembles the RO pre-filter
Now the expert opens the pre-filter cap and fit the given pre-filter candle. then tightly closes the filter cap. In order to seal it completely, water purifier technician uses Teflon tape. After this technician joins the elbow connectors on both sides of the pre-filter.
Installing the RO membrane
Next thing the professional does is opening the RO cabinet containing the remaining filters. Then, RO technician Inside spots the membrane filter and unfastens the pipes linked to the filter's cap. Then, technician unfastens the cap and fit the membrane into the filter case. Then, tightly closes the cap.
Positioning the filter tap and auto cut-off system for the RO
Filter tap
RO water purifier technician Pulls out the nut and washer from the back of tap. Then holds the tap into the outlet provided in the water tank and put the washer from the Inner side of the tank to the back side of tap. Then places the nut that you removed earlier to fix the tap in place.
Auto cut-off system
He takes out the floating mechanism from the wired connection. Unfastens the nut on the floating cylinder and fixes the filter below the membrane compartment. Now fixes it there using the nut and joins the electrical connection back to the cut-off system.
Assembling the tank and the filter compartment
The RO expert then assembles the water tank and the filter compartment and ensures that the screws are tightened properly.
Attaching the pipes
Then the professional starts joining The RO purifier's pipes. Then Inlet of the pre-filter is linked to the feed water valve connected with the tap. Now technician links the pre-filter's outlet to water inlet for the RO unit. The outlet of the RO unit releases waste water. Then joins a pipe to the outlet and allows the other end open into a sink or any other suitable area to drain water.
Finally, RO technician suspends the RO unit and the pre-filter on the wall and associates the system with an electric plug.
It is recommended to not use the first batch of filtered water. Drain the first batch and start consuming the water from the second batch onwards.
Always take the services of experts for RO installation, be it for residential usage or commercial or industrial purpose. Contact us for RO installation at your home or office. The team promises to offer you great services.
